![]() ![]() Once the equipment location is chosen, determine the best routing for cables and wires to connect the system. Locate the radio and microphone within easy reach, giving the operator a clear view the display.ĭo not locate the radio or microphone in a position that interferes with safe operation of the vehicle. Priority operation during scanning is the same as with Priority mode A, except that the priority channel is pre-programmed, not the selected channel.īUSYCHANNEL LOCKOUT OVERRIDE This mode operates in the same manner as Busy Channel Lockout with the exception that the user can override and transmit by pressing the CG button. PRIORITY MODE A The channel selected with the Channel Select knob becomes the priority channel as well. The EMH radio can be programmed with one of four priority scan modes: A, B, C, and D. Scan operation is indicated on the display by the flashing SCN annunciator (alphanumeric mode) or two flashing bars (numeric mode). ![]() The CG annunciator appears on the display to indicate that the Code Guard has been changed from its original programming. Your dealer will help define the best operational settings for your system and program them into the radio. This function may be used on any channel that is programmed to a frequency pair (repeater channel). When TA is on, the radio transmits on the receive frequency of the selected channel, bypassing or talking around the repeater. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |